Overview
Potentiometers and other sliding position sensors are electromechanical devices whose performance and operating life can be dramatically improved through lubrication. Each of these devices has a metal wiper that moves along a resistive element, to regulate current flow to a device or to indicate when precalibrated positions are reached. The tracks may be any of a variety of conductive materials: wound metal wire, conductive plastic or ceramic compositions. Lubricating these tracks helps prevent wear, attenuate electrical noise and extend operating life.
Potentiometers and other sliding position sensors are electromechanical devices whose performance and operating life can be dramatically improved through lubrication. Each of these devices has a metal wiper that moves along a resistive element, to regulate current flow to a device or to indicate when precalibrated positions are reached. The tracks may be any of a variety of conductive materials: wound metal wire, conductive plastic or ceramic compositions. Lubricating these tracks helps prevent wear, attenuate electrical noise and extend operating life.
Selecting lubricants for potentiometers and other electromechanical sensors oil or grease.
Wear prevention is the primary reason for potentiometer track lubrication. Most importantly, the lubricant film must be strong enough to prevent wear but thin enough throughout the operating range to prevent contact hydroplaning and resulting intermittencies. When working with small, delicate mechanisms with extremely low starting torque, oils may be required. However, greases, with their important stay-in-place advantage, have been the most successful potentiometer lubricants. Light, low shear greases, some approaching a semi-fluid state, can often be designed for even very low power applications.
Broad temperature film strength.
Since it is the film of lubricant that prevents wear, good film strength is essential. While arcing is not usually a problem, high heat generated by resistance — the temperature can reach 225°C in automotive dimmer switches, for example — requires a lubricant to retain film strength over a broad temperature range.
Ambient conditions also affect lubricant selection. Very low temperatures cause some lubricants to become so viscous that they prevent motion. On the other hand, in underhood applications where performance-related devices are multiplying, extreme wide temperature and fuel-resistant lubricants have become a necessity.
A note about damping greases.
Although not intended as track lubricants, Nye’s damping greases are widely used on potentiometers and other rotary devices where shaft/bearing lubrication is needed to damp free motion and produce a “velvet feel.” See our application summary on Damping Greases for details.
RELATED PAGES
TECHNICAL HELP
TECHNICAL HELP
Related Documents
Lubricants for Potentiometers and Sliding Position SensorsPotentiometers and other sliding position sensors are electromechanical devices whose performance and operating life can be dramatically improved through lubrication.
Our Products
The following is a partial list of popular Nye lubricants for potentiometers and sliding position sensors. Additional oils and greases are available to meet a wide range of application requirements. For technical specifications, evaluation samples, questions about any Nye products, or to discuss a lubricant custom-designed for your application — call us at +1.508.996.6721.
|
Lubricants for Potentiometers and Sliding Position Sensors |
Temp Range (°C) |
Base Oil Viscosity @ 40°C |
Applications |
| Rheolube™ 716A | -54 to 150 | 18.5 cSt | Ester-based grease fortified with special additives to reduce electrical noise & wear in electrical contact applications. Good wide-temp serviceability. Base fluid has excellent film strength for very high-load applications. Use with caution around ester-vulnerable plastics. |
| NyoSil™ M25 | -70 to 200 | 56 cSt | Complex silicone oil for long term wear protection, & excellent wide-temperature performance. |
| Fluorocarbon Gel 813-1 | -70 to 200 | 60 cSt | Wide temperature complex silicone oil in chemically inert thickener. Excellent low-temp starting torque & noise reduction properties. Ideal choice for conductive plastic potentiometers. |
| NyoGel® 781A | -70 to 200 | 55 cSt | Very soft, complex silicone soap-gelled grease often used as an alternative to the fluorocarbon-gelled 813 series. Recommended where electrical noise reduction is a special concern. |
| UniFlor™ 8951 | -90 to 200 | 18 cSt | Chemically resistant fluorinated grease with exceptional low temperature capability & low-volatility. Useful where contact force is <50g. Helps prevent hydroplaning, especially where there is high-speed linear motion. |
| UniFlor™ 8511 | -50 to 225 | 65 cSt | Chemically resistant fluorinated grease with excellent thermo-oxidative stability & low-vapor characteristics. |
| UniFlor™ 8981 | -65 to 250 | 140 cSt | Chemically resistant fluorinated grease with wide-temp fluidity, very low volatility, & exceptional high-temp stability. Lowest shear resistance for delicate low-temp applications. |
Because we cannot anticipate or control the many different conditions under which this information and our products may be used, we cannot guarantee the applicability of this information or the suitability of our products in any individual situation. For the same reason, the products discussed are sold without warranty, expressed or implied. Statements concerning the possible use of our products are not intended as recommendations to use our product in the infrigement of any patent.
